通风空调工程由通风系统和空调系统组成。实验室规划无菌试验室—洁净实验室—生物安全实验室的建设方案包括:建筑布局和装修、空气调节、给排水、气体供应、电气设计、集中控制、安防、施工工艺、检测、培训等多方面内容。实验室家具空气调节系统是洁净实验室—生物安全实验室安全运行的关键。
ventilation and air conditioning engineering is composed of ventilation system and air conditioning system. laboratory planning sterile laboratory clean laboratory biosafety laboratory construction scheme includes: building layout and decoration, air
conditioning, water supply and drainage, gas supply, electrical design, centralized control, security, construction technology, testing, training and other aspects. the air conditioning system of laboratory furniture is the key to the safe
operation of clean laboratory and biosafety laboratory.
由于洁净实验室—生物安全实验室内操作对象是危险性的微生物,对人体、动植物或环境具有危害,必须通过采用合理的空气调节系统,保持洁净实验室—生物安全实验室的相对负压环境无论何时都不被破坏,以保证实验室内危险性微生物不能向外部环境中扩散。实验室装修设计的通风系统由排气扇、风道、风道部件、消声器等组成。
because the operating objects of clean laboratory biosafety laboratory are dangerous microorganisms, which are harmful to human body, animals and plants or the environment, it is necessary to adopt reasonable air conditioning system to keep the relative
negative pressure environment between clean laboratory and biosafety laboratory from being damaged at any time, so as to ensure that dangerous microorganisms in the laboratory can not spread to the external environment. the ventilation system
of laboratory decoration design is composed of exhaust fan, air duct, air duct components, muffler, etc.
空调系统通过空调冷、热源、空气处理器、空气输送管道、空调等方式输送和分配到室内温度、湿度、气流速度和净空。
the air conditioning system transmits and distributes the indoor temperature, humidity, air velocity and clearance through air conditioning cold, heat source, air processor, air delivery pipeline and air conditioning.
实验室装修设计的通风空调工程由通风系统和空调系统组成。实验室通风系统由送风排风扇、风管部件、消声器等组成。该空调系统由空调冷热源、空气处理器、输气管道输送与分配、室内温度、湿度、气流速度及洁净度的自动控制与调节等部分组成。
the ventilation and air conditioning engineering of laboratory decoration design is composed of ventilation system and air conditioning system. laboratory ventilation system is composed of supply and exhaust fan, air duct components, muffler, etc. the
air conditioning system is composed of air conditioning cold and heat source, air processor, gas pipeline transportation and distribution, indoor temperature, humidity, air velocity and cleanliness automatic control and regulation.
通风空调工程施工主要内容:
the main construction contents of ventilation and air conditioning engineering are as follows:
(1)风管、风管部件、消声器、集尘器等的制作安装。
(1) manufacture and installation of air duct, air duct components, muffler, dust collector, etc.
(2)风管及部件,制冷管道防腐保温。
(2) anti corrosion and thermal insulation of air duct and parts, refrigeration pipeline.
实验室通风系统
laboratory ventilation system
(3)安装空气处理器(室)、风机盘管和诱导器、通风机、制冷管道、冷水机组或冷热水机组等。
(3) install air handling unit (room), fan coil unit and inducer, fan, refrigeration pipe, chiller or chiller, etc.
在通风方面,从加工,安装到调试的空调项目都与相关的协调和协调密不可分。特别是进入装修,装修和机电安装后,的协调和协调往往存在很多问题。
in terms of ventilation, air conditioning projects from processing, installation to commissioning are closely related to the coordination and coordination of relevant disciplines. especially after entering the decoration, decoration and mechanical and
electrical installation, there are many problems in professional coordination and coordination.
由于大多数水电安装工程都是业主指定的施工单位,在与土建及其他单位交叉施工中经常出现问题。在施工后期,由于这些问题,会出现返工,造成工程投资的巨大浪费,影响工程的工期,有的还会影响建筑物的使用,甚至导致质量问题和安全风险。
as most of the hydropower installation projects are professional construction units designated by the owners, problems often occur in the cross construction with civil engineering and other professional units. in the late stage of construction, due to
these problems, there will be rework, resulting in a huge waste of project investment, affecting the construction period, some will affect the use of buildings, and even lead to quality problems and safety risks.
建设中有哪些流程和如何合作?
what are the processes and how to cooperate in the construction?
实验室装修设计在土木结构施工过程中,通风和空调的主要任务是预留管道的孔,预嵌套管和铁件以及冷热水管。嵌入式铁件主要用于固定大口径风道和冷热水管道。
in the process of civil structure construction, the main task of ventilation and air conditioning in laboratory decoration design is to reserve pipe holes, pre embed casing, iron parts and hot and cold water pipes. embedded iron parts are mainly used
to fix large diameter air duct and hot and cold water pipes.
昆山昌瑞空调净化技术有限公司,专注从事
凯发k8旗舰厅-k8凯发天生赢家系列产品(初/中/高效、化学过滤器等)、洁净室净化设备(抛弃式/可更换式/自动卷绕式过滤器、
凯发k8旗舰厅-k8凯发天生赢家、ffu高效过滤器净化机组)的研发、生产、销售和售后。
changrui air conditioning purification technology co., ltd. focuses on the r&d, production, sales and after-sales of air filter series products (primary/medium/high-efficiency, chemical filters, etc.) and clean room purification equipment (disposable/replaceable/automatic
winding filters, high-efficiency air supply outlets, ffu high-efficiency filter purification units).